Blog - Page 2 of 69

IoT, Additive Manufacturing and the Question of Data Ownership

2021-08-04

Lee-Bath Nelson

3D printed infrastructure with embedded sensors and who owns the data generated?

MX3D 3D printed bridge in the red light district of Amsterdam. Photo: Thea van den Heuven

3_1920x1200_1920x1200_50f1bb20-966e-4a06-aa6c-2aff7cf30225_1920x1200

Tessa’s Weekly Picks – 3D Printed Flip-flops

2021-07-30

Tessa Blokland

Each of Tessa’s Weekly Picks is a curated group of 3D printed designs, based on the week’s chosen theme.

Preparation Revisited – Preparing for Supply Chain Failures

2021-07-28

Lee-Bath Nelson

1.5 years into COVID-19 – supply chain failures are still expected and preparation is key

Evergreen stuck in suez canal causing more supply chain failures

Tessa’s Weekly Picks – 3D Printed Replacement Parts

2021-07-23

Tessa Blokland

Each of Tessa’s Weekly Picks is a curated group of 3D printed designs, based on the week’s chosen theme.

Existing Additive Manufacturing Material #AMneeds

2021-07-22

Lee-Bath Nelson

Part of the #AMneeds series on unmet needs in 3D printing

Solukon 3d printing metal powder recuperation

Tessa’s Weekly Picks – 3D Print a Drink

2021-07-16

Tessa Blokland

Each of Tessa’s Weekly Picks is a curated group of 3D printed designs, based on the week’s chosen theme.

Additive Manufacturing Improving Day to Day Life – 3 Examples

2021-07-15

Lee-Bath Nelson

3D printing impacting our day to day – a bit or a lot

3d printed glasses for dyslexic children Lexilens

reframd-eyewear-sunglasses-black-design-afro_dezeen_2364_col_hero-900x600

Tessa’s Weekly Picks – 3D printed Sunglasses

2021-07-09

Tessa Blokland

Each of Tessa’s Weekly Picks is a curated group of 3D printed designs, based on the week’s chosen theme.

3D Systems – Acquire, Divest, and Acquire Again

2021-07-07

Lee-Bath Nelson

A look at the strategic and M&A history of 3D Systems might prove useful for other AM companies

Lamellar-heat-exchanger-3D-printed-by-3D-Systems-Formnext-2019

Tessa’s Designer Pick – 91-92 and 3D Printing

2021-07-02

Tessa Blokland

Each of Tessa’s Designer Pick is a curated group of 3D printed designs from one designer, a design studio, or a school.

The Blog

IoT, Additive Manufacturing and the Question of Data Ownership

Tessa’s Weekly Picks – 3D Printed Flip-flops

Preparation Revisited – Preparing for Supply Chain Failures

Tessa’s Weekly Picks – 3D Printed Replacement Parts

Existing Additive Manufacturing Material #AMneeds

Tessa’s Weekly Picks – 3D Print a Drink

Additive Manufacturing Improving Day to Day Life – 3 Examples

Tessa’s Weekly Picks – 3D printed Sunglasses

3D Systems – Acquire, Divest, and Acquire Again

Tessa’s Designer Pick – 91-92 and 3D Printing

Subscribe

Categories